| AK-47 | |
|
AK47 Bulgarian OD 40rnd.
|
|
|
AK47 Bulgarian Plum 40rnd.
|
Yugo RPK US Made Barrel Mfg. Green Mountain... Finned Barrel, In the White, New US Made YUGO RPK Barrel. Counts as a 922R Compliance Part.  |
|
AK47 Polish Bayonets, Excellent Condition, These are
the Best Looking Bayonets we have seen.
|
Bulgarian 7.62x39 Plum 30rd. polymer waffle pattern magazine. Limited Quantity!  |
|
|
Used, Great Condition  |
|
Bulgarian AK47 40 rd. Polymer Magazine 7.62x39mm,
Bullet Pattern on the Magazine Body, Brand NEW
|
AK flat bending jig with top rail
bending add-on /8" Cold Rolled Steel Base • Precision "NO MEASURING" Alignment Pins • Precision Milled Side and Lower Plates • Relief cuts on magwell dimples, selector, selector stop and X-Y axis dimples • Top rail bending jig included for an ideal no-hammering bending process • Top rails are bent using your shop press  |
|
|
 |
|
|
|
|
Designed with direct input from military and law enforcement, the TAPCO Vertical Grip provides the shooter with increased weapon control and additional battery storage. The unique contour of the grip allows solid attachment of tactical light tape switches along the flat sides. Secured with a rubber plug, the waterproof storage compartment allows for the storage of batteries and other weapon essentials. Mounts securely to the rail and enables the shooter to acquire the target faster.
|
These are used with Finish Wear  |
|
|
These flats are made from 4130 annealed steel as well as the rails. I had some new flats made up for the Hungarian AMMS due to the hole locations being in a different location than the Polish Underfolder flats. The picture above is of the Polish since there is no way to see the difference without having one in your hands to compare. This flat will not work with the Yugo M70, Yugo M92, Polish Underfolder or Romanian Underfolder rear trunnion.  |
|
|
Global Trades, US Made, Black Polymer Stock Set
|
|
|
Detent pin and spring to retain threaded muzzle attachment AK-47 front sight. This part is retained by the front cross pin on the front sight support
Romanian |
|
|
Protects mag feed lips and ammo from dirt, dust or moisture. Fits 7.62x39 AK Mags. Black & flexible.  |
|
|
U.S. made solid polymer folder including trunnion and hinge mechanism hardware U.S. made black upper and lower hand guards for stamped receivers, new design U.S. made matte black pistol grip, and stainless steel heat shield. The whole set counts as 3 U.S. made parts for sec. 922r compliance. |
|
AK Receiver Flat and Rails
|
Adapter for AK, Bulgarian - From 14 x 1 mm left hand threads to 24 x 1 1/2 mm right  |
|
|
Used Good Condition |
|
Great combat quality and high tech design
|
US MADE FCG ~3pc. Hammer, Single Catch Trigger and Disconnector for Stamped receiver. - Metal Injection Molded - Black Oxide Finish - Designed from the original AKM By Arsenal Inc. Las Vegas, NV  |
|
AK47 Bulgarian Magazine, Bulgarian ~ 30 Rd, "Waffle Pattern" (5.56x45)
(.223 cal.) Limited Quantity. First come, first served.
|
U.S. made PBS-5 replica dummy suppressor with 24x1.5mm right-hand threads.
(RIFLE NOT INCLUDED) |
|
|
|
|
|
Holy Crap! look what we have here!
|
|
|
The popular phantom flash suppressor has been redesigned to work as a muzzle compensator while maintaining the flash hiding capabilities. This 4 port design eliminates dust problems when shooting prone. Threaded 14x1 Left Hand Thread. 
|
|
|
Used Good Condition  |
|
Fits AK-47 Bayonet Used good condition  |
|
|
|
|
Kalashnikov Rifles and Their Variations
|
Brand New "Original" Wood Pistol Grip Hard to Find and Very Limited Qty  |
|
Chinese AK-47 Pistol Grip
|
|
|
|
(MNT-HG478SA) Precision machined with maximum strength. Four mil-spec Picatinny rails for versatile accessory applications. Clever rail system locking design includes lower connecting walls mating with upper channels to achieve the most solid and secure fit- Lower quad-rail system to secure barrel Upper quad-rail system to secure gas tube Simple and friendly installation, no gunsmith or tool required. Great zero-retention capability for all accessories installed on the rails. Intensively tested by field experts under extreme heat and sub-zero temperature and demonstrates most satisfactory performance. Ultimate tactical solution to enhance accuracy under toughest environments. Fits model 47 and variants. Hard anodized finish for wear resistance. Great quality UTG rubber rail guards included for comfort and protection  
|
|
New Surplus
|
Waffle Style
|
|
New Condition. Comes with all pictured very limited qty.
|
Excellent/New Condition.
 |
|
Romanian AK-47 Buttstock, Trunnion, & Trigger Guard Price: $24.99ea
Back Order Status
|
Holds (5) 30rd AK Mags. Leather-like Green vinyl pouch with buckle closure, shoulder strap, and loops to attach to belt. Limited Qty...  |
|
|
Holds 5 30rnd. Magazines Used Good Condition |
|
|
AK-47 30rnd. Magazines. Made in USA by Pro-Mag. New Production. Clear, Lifetime Warranty 
|
|
These are for installing the new gas pistons |
Axis or Pin for trigger, hammer, or auto sear. Fits all AK-47, MAK90, or AK-74.  Axis or Pin for trigger, hammer, or auto sear |
|
|
These are made with the magwell pre-cut for 7.62 with no choice for 5.45 magwell openings. The dimensions and hole placing are exactly like my more expensive flats, but were made to be more affordable. The ejector rails will now be longer like the Bulgarian style rails from K-Var with the mag stabilizer which no other flat that is on the market has. The right side rails are also like the original rails that have the bump on the rail to center the hammer in the receiver. You can't buy flats and rails of this quality from any other manufacturer. these were reverse engineered from an actual receiver. These flats will need to have the hammer/trigger 5mm & 7mm holes enlarged with a reamer. A drill bit only has two flutes and a reamer has several and will center up on the hole better than a standard drill bit.  12.00ea |
|
|
Shell extractor is original military issue equipment, sometimes handy in an emergency. Works with 7.62x54R Rifles  8.99ea |
|
|
|
|
|
Modified from NEW East European mags Modified in the USA Metal construction  49.99 |
|
|
Made in the U.S.A. **Now BATF Approved Accepts single or double hook triggers Constructed from 4130 carbon steel 1.50mm thick Comes in a softened state...once formed it must be heat treated and hardened All holes are pre-drilled to the correct sizes Magazine opening may require fitting  |
|
The barrel extensions weigh 1lb and are 1.5" in diameter.
|
|
|
AK-47 Parts COMBO.....G2FCG/Gas Piston/Slant Brake
Tapco US Made G2 Fire Control Group
US Made Gas Piston Tapco/ Or Century's
US Made Slant Brake
  
|
fits between Trigger Guard & Receiver  |
|
|
Manufactured for 1.05mm stamped receivers...can easily be trimmed for thicker receivers Constructed from military grade composite U.S. Sec. 922r compliant part Made in the U.S.A. Marked TAPCO U.S.A. Lifetime warranty Black, OD Green, Tan    |
|
NOW IN STOCK!
Made In U.S.A.
Threaded for 14x1 Left Hand Thread.
Lower Hand guard Retainer Slot is Cut.
This is a Virgin Barrel in the White
NON Chrome Lined
Counts as a US Part
|
US Made Polymer Grip
US Made Hammer
US Made Disconnector
US Made Trigger
US Made Gas Piston
5 US Parts in one package
|
Made in the U.S.A. | |
